Islington Locksmith Professional 24 7 Lock And Key Services
Professional Locksmith Greenford 24 Hour Emergency Door Locks Service Locked Out Broken Or Lost Keys We Can Solve Your Problems Fast
Please Use The Contact Form Below With Any Questions Or Requests. Wherever you are in the UK We Can Help.
Locksmith Near Me
Door Lock
Door Knobs
Combination Door Knob Locks
Patio Doors Locks
|
I hope this all makes sense locksmith Greenford, I took the door furniture off which was a brass lever lock handle. There was a hole cut out in the wood for the bar where a sashlock had originally been fitted.
Somebody had obviously put a deadlock back in and just screwed the lever lock furniture over the top, as I could still see the black case but no spindle on the lock fitted now. The securefast decoder was not too wide to go into the curtain - it did go in but would not turn in the keyway as the blade with the holes in where you put the pins was too wide to actually turn in the lock as it was poking out the lock the other side so definitely a 7g Plate was black gloss - smooth. Doesn't the security hard plate only run in a straight line above the keyway - the hard plate on this lock went either side. If it's any help, Builders merchants Selco sell a black 7q mortice lock with a smooth case badged as a Morgan with over size levers, like a 114 but longer and wider.
Believe Paton sell the same lock again black lock case. 7g era key should be the same width so should turn in lock, had this same situation, thought it was a securefast. Struggling with this one. Rough silver case with indent around keyway (not raised like union 3) Non curtained 3 lever that I can't fucking pick, overlift or anything. Any thoughts? Something isn’t right but I don't want to drill it as it feels pickable, keeps locking up ala antipick notches. Locksmith Greenford gave me it as a casual job so no hurry, just failed in the 20 mins I had between other jobs. I reckon it will open with a set of my souber douper special 3 lever try outs keys (with a 2 lever set thrown in for free) Luckily I happen to have a set of both - yours delivered for just £15 nobody took the bait on these yet, I reckon you should take them to the Christmas bash and give them to the first person to buy you £15 worth of beer. It was a eurospec 3 lever. Picked ok without the pressure of trying to rush. That is the thing you need to be in the zone and calm it all down when picking, easier said than done when someone is on your case telling you their life story. Be grateful if anybody could tell me the drill point for era vectis 45 backset what’s the problem with it?
They take minutes to open with Geraints decoder, much easier and quicker than drilling. 20mm Vertical and 3mm towards the bolt for gates. Seen loads of these with a knackered bolt thrower. I will dig the drill point out when I get a mo Neil. Backset doesn’t mean anything, it is all relative to the key hole. Like the locksmith Greenford said, (-) 20mm up and 3mm to the bolt. They have small levers with no anti-pick as far as I remember, so it would be an easy enough pick if your tension tool and wire were long enough, chance not to be. The quality is not good, agreed. |
Key Cutting
Furniture Locks
24 Hour Locksmith
Door Handles
Padlock
|
|
|
Thanks For Visiting Our Locksmith Greenford Shop
| Home | Back To Top | Services | About | Contact | Terms | Privacy | Cookies | Locked Out |
| Home | Back To Top | Services | About | Contact | Terms | Privacy | Cookies | Locked Out |